Gear ratio and speed calculator
Enter chainring, cog and cadence to see your speed and how many metres you travel per pedal stroke. Use it to choose the right cassette for your climbs.
In 1 minute: save routes, download the GPX and join group rides.
Sign upEmbed on your site or blog
For blogs, clubs and sports teams: copy the code and paste it into your page.
What development means
Development is the distance travelled per pedal revolution: wheel circumference times the ratio of chainring to cog teeth. The higher it is, the harder the gear.
Choosing a gear for climbing
For long, steep climbs you want to hold 80-90 rpm even on the hardest sections. If your easiest gear drops you below 60 rpm, consider a larger cog or a smaller chainring.
Worked example
With a 50-tooth chainring, a 17-tooth cog, a wheel circumference of 2,100 mm and a cadence of 90 rpm, the development is 2.10 × (50 / 17) = 6.18 m per pedal turn. Speed comes out at 6.18 × 90 × 60 / 1,000 = about 33.4 km/h. With a 21-tooth cog the development drops to 5.00 m and speed at the same cadence to about 27 km/h.
Method and limits
Development is the distance covered per full pedal turn: wheel circumference times the chainring-to-cog ratio. Circumference depends on tyre, pressure and load, so a rolled-out measurement is more precise than the nominal value. The calculation ignores slip and gradient and assumes constant cadence: use it to compare ratios and to choose cassettes and chainrings, not to predict real speed.
FAQ
- What is the wheel circumference of a 700x28?
- About 2,136 mm. A 700x25 is about 2,105 mm.
- Compact or standard?
- For long climbs and amateur riders a compact (50/34) gives easier gearing; a standard (53/39) suits strong riders on flat roads.